Isixhobo sokutshixa iValve yeHlabathi ye-QVAND M-H12 yoKhuseleko lwezoShishino

Inkcazelo emfutshane:

I-M-H12 enentambo egqunywe-Usebenzisa intambo yokuncamathisela kwiivalvu zesango.

Ukusebenzisa iCable attachment kwiivalvu zesango.

izincedisi Cable ungasebenzisa 3.2mm(1/8”) PVC steel stainless steel usete intambo.

1. Umzimba wokutshixa wenziwe nge-nayiloni eyomeleziweyo ye-PA.Akukho deformation kunye ne-corrosion ephelayo, ukumelana nobushushu obuphezulu bomelele kwaye kunxitywe ukumelana.

2. Kulula ukuyisebenzisa.ukusebenza ngokwexesha, qinisa intambo yesikrufu esilungele izitshixo zevalvu ezahlukeneyo.Ivili lesandla esilungisiweyo, ukusebenza ngokwewotshi qinisa intambo yesijivu.Imingxunya emibini yokutshixa.Intsimbi yokuluma intambo ifanelekile kwizitshixo ezahlukeneyo zevalvu.

3. Ukudibanisa okugqibeleleyo ukulungelelanisa ukutshixa iivalve ezahlukeneyo, ezifanelekileyo kwivalve yesango, ivalve yebhola, ivalve butterfly njalo njalo.

Thumela i-imeyile kuthi

Iinkcukacha zeMveliso

Iithegi zeMveliso

Iimbonakalo:

1. Kukhuseleke ngakumbi ukusebenzisa ngekhusi lokhuseleko kunye nethegi ngaphandle.
2. Ukusebenzisa i-cable attachment kwiivalvu zesango.
3. Ububanzi bomqheba obuninzi 40mm (umqheba max ubukhulu 28mm).
4. Intambo yokuncamatheliswa yintambo yentsimbi ene-1/7"(3.5mm) enerustproof sheathed metal.
5. Ubude bekhebula bu-2.4m, obunye ubude bukhoyo.

Inkcazo

a.ngengalo ezi-2, kwiivalvu ezi-3,4 okanye ezi-5, okanye ukutshixa iivalvu kwindawo ethi "on","off" or "throttled" position.
b.Izincedisi zekhebula zingasebenzisa i-3.2mm(1/8") isethi yentambo yentsimbi ye-PVC yensimbi engenasici.
c.Ukuvalwa kwevalvu yendalo yonke esetyenziselwa ubuninzi bobubanzi obuyi-40mm (ukubamba ubukhulu be-28mm).
d.Ulawulo oluphezulu lwetsimbi, intambo yentsimbi usebenzisa inkqubo yokulawula isitampu, isigxina esiqinileyo, ukusetyenziswa okukhuselekileyo, ukugquma komhlaba akuyi kugqwala kwindawo eyomileyo.
a) Kuyo yonke indawo, kulula ukuyisebenzisa, ikhaphukhaphu kwaye yomelele.
b) Ukusuka kwi-industry grade steel kunye ne-nylon material, ukuxhathisa imichiza.
c) I-clamp entsha yokuvula inokusetwa kwi-loop evaliweyo, ukuze isetyenziswe kumqheba obanzi.
d) I-cna efanayo isetyenziselwa ukutshixa i-lever enkulu, i-T-handle kunye nezinye ezinzima ukulungisa izixhobo.
e) Isebenziseka ekubambeni ubukhulu bobubanzi obuyi 4cm (bamba ubukhulu bobukhulu be 2.8cm).
f) Inokuthintela ukubamba ngengozi kunye nokusebenza okungagunyaziswanga okanye ukusetyenziswa kakubi.
g) Iziqhoboshi ezivulekileyo zinokufakelwa phezu kweeluphu ezivaliweyo kunye neziphatho ezibanzi ngokunjalo nasekutshixeni iilever ezinkulu, ii-T-handles kunye nezinye izixhobo zoomatshini ekunzima ukuzilungisa.